Troubleshooting - Dixon ZTR 5020 Operator's Manual

MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the variables
that interact creating differences in cut quality. Examination of one or more of the above will
generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
SITUATION
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Page 42

TROUBLESHOOTING

CAUSES
Ground speed
Incorrect engine to
mower deck belt
Engine RPM too low
Dull or bent blade
Un-level mower deck
Grass buildup under
mower deck
Improper blades
Uneven tire pressures
REMEDY
Reduce mowing speed Refer to
page 39 for part numbers
Increase engine RPM to maximum
Sharpen or replace as required
Consult your dealer
Clean out underside of mower deck
Replace with original equipment
blade designed for the Estate Series
Models
Check and adjust as required per
operators manual