Dixon ZTR 503 Operator's Manual page 21

CLEANING THE MOWER:
A clean machine is a source of pride to the owner. However, cleaning by use of high
pressure commercial washes is not recommended. The high water pressure, combined
with solvents or alkaline detergents, can lead td corrosion of electrical components
or damage to the sealed bearings used on your mower. A better approach is the use of
mild household soaps and low water pressure. A stiff brush can be used to loosen
excess grass and dirt build up. Avoid directing water pressure onto the mower deck
hub assemblies, electrical wiring and engine components such as air filter openings.
To remove excess water which accumulated during washing of the mower, either blow off
with compressed air, if available, or start the engine, allowing a long enough
operation time to dry thoroughly. It is advisable to engage the mower deck for
a short time to disperse all water from pulleys and belts.
Please help protect the environment by avoiding all chemicals which may damage or cause
harm to plants and animals in your area.
CARE AND MAINTENANCE - MODEL 503
Page 20