Operation Instructions - Dixon ZTR 503 Operator's Manual

THROTTLE CONTROL LEVER:
Controls engine speed, has positive detent in fully opened position to insure
adequate cooling of the engine and maintain mower deck blade speed in a mowing
application. Throttle will automatically return to idle position if not locked into
the positive detent located on control panel to operator's right.
MOWER DECK CUT HEIGHT LIFT LEVER:
Controls the cutting height of the mower deck. Seven positions of adjustment in
which the very top, or highest notch, is used for transporting the mower in a non-
mowing situation. Located in front of operator on the right side of mower.
BLADE DRIVE:
To engage the mower deck cutter blades, lift switch up lightly and push
forward. To disengage blades, pull switch backward. Switch is clearly
marked "on and off".
LIGHT SWITCH:
The headlights are activated by pushing the switch forward. Failure to turn off the
lights, once the engine is stopped, will result in rapid discharge of the battery.
FUSE BLOCK:
Protection of the electrical system is by (1) 15 AMP fuse. To remove the fuse for
inspection, just simply lift upon fuse block lid. If fuse burns quickly, please
consult your dealer for inspection and repair. Never attempt to bypass the fuse by
any method.
OPERATION INSTRUCTIONS (continued)
Page 13