Table of Contents
Advertisement
Adjusting Screen Resolution
Use the Resolution slider to adjust the desired resolution of the display (see circle 2 in the
previous figure).
Adjusting Color Level
Use the Colors drop-down list to select a color complexity level (see circle 3 in the previous
figure).
Setting the Universal Push2TV HD TV Adapter as the Primary Display
To make the Universal Push2TV HD TV adapter the primary display:
1.
Select the screen that is connected to the HD Base—for example, Default Monitor on
DisplayLink Graphics Adapter, as shown in the previous screen.
2.
Select the Extend the desktop onto this monitor check box. (In Windows XP: Extend my
Windows desktop onto this monitor).
3.
Select the This is my main monitor check box. (In Windows XP: Use this device as the
primary monitor).
4.
Click OK to save the new settings.
Note:
On some PCs it is necessary to disable the main display (clear the
Extend the desktop onto this monitor check box for the main
display) as part of the same settings change.
The HD Base remains the primary one if the PC enters Hibernate or
Suspend mode or is rebooted. If the HD Base is detached, the main
display becomes the primary display again.
Push2TV HD Adapter
30
Advertisement
Table of Contents
