Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NETGEAR POE101
Summary of Contents for NETGEAR POE101
- Page 1 Power Over Ethernet Adapters POE101 Installation Guide...
- Page 2 The POE101 provides an ideal solution for locating an access point in a building ceiling or attic, for example, where it has optimal radio coverage without requiring an AC power outlet. The POE101 can extend the placement of a wireless access point up to 328 feet (100 meters) by using standard category 5 Ethernet cable.
-
Page 3: Package Contents
Two straight through Category 5 Ethernet cables: • a short cable from an Ethernet hub or switch to the POE101 base unit and • a second cable (up to 328 feet) for connecting from base unit to a terminal unit. - Page 4 Ethernet cable (not included in the package) from the POE101 base unit’s “LAN OUT” port to the terminal unit’s “LAN IN” port. Verify that the POE101 terminal unit has power by checking to see that the LED is lit. LAN OUT POE101 Base unit: "LAN OUT"...
- Page 5 Now you should see that power is provided to the NETGEAR wireless access point. If there is no power, please refer to the Troubleshooting section in this guide. Please see the illustration below. Your final connection should be similar. modem...
-
Page 6: Troubleshooting
Q: The POE101 does work with my Gigabit Ethernet network. A: This product is designed specifically for the Netgear access point. It may not work with other vendor’s products. Using it with a Gigabit Ethernet device may damage the device and void the product warranty. -
Page 7: Statement Of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. -
Page 8: Product Specification
Category 5 with RJ-45 connectors for terminal to access point DC power cable for terminal unit to NETGEAR ME102 (North American version) DC power cable for terminal unit to all other NETGEAR 5V DC powered devices Localized AC power cable for wall to power adapter Technical Support Please refer to the Support Information Card that shipped with your product.