2
Burn Firmware
Use one of the below methods to burn the firmware to a CD-R disc.
2.1
Windows
OS CD Writing Program
®
1) Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer.
2) If the below (or similar) screen appears (Windows XP), left click on CANCEL.
3) Right click on the
PANA_DVD.FRM
file on the DESKTOP, mouse over
SEND
TO, and
then left click on the
CD BURNER
DRIVE.
4) If the below screen appears, left click on YES.
NOTE: The below screen may appear momentarily.
DMR-E80 DVD Recorder Firmware Installation Instructions
Page 3 of 6