Headlight Adjustment - Dixon Operator's Manual electric lawn mower Grizzly 2005 Safety And Operating Manual

CARE AND MAINTENANCE

HEADLIGHT ADJUSTMENT

1. Loosen the 1/2" retaining nut underneath the
headlight and slide the headlight forward out of
the recessed area of the fuel tank.
2. Loosen the 1/2" nut on the "U" shaped holding
bracket and swivel the headlight vertically to
adjust the height of the beam. Tighten the bracket
nut.
3. Replace headlight into recessed area of the fuel
tank.
4. Swivel the headlight horizontally to illuminate the
desired area and tighten the headlight retaining
nut.
44