Toshiba MD20FM1 Owner's Manual page 45

Using the audio/video inputs
If you connectthe TV/DVD to VCR, camcorderor TV game, you can select by pressing INPUT SELECT.
Press INPUT SELECT repeatedly to select the desired mode. NOTE:
"LINE1", "LINE2" or TV channel will display on the screen for 4 seconds. In the DVD mode this key will not
L,,E, operate.
T TVChannel _ LINE1 _ LINE2
(Back) (Front)
/
1. To connect the TV/DVD to a VCR
Press the INPUT SELECT to select the desired mode to use the TV as a monitor.
Operate your VCR as usual.
VCR
ttt m° Aud'°'Vide°' OUT
Rear of TV/DVD
AUDIO IN (L) /
AUDIO IN (R) /
2. To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Camcorder _r__
t
t t
To Audio/Video OUT
__- VIDEO IN
Audio/Video cord (not supplied)
Front of TV/DVD
VIDEO UMON0.AU[_O-R HEADPff0NE
VIDEO IN --_
_ _ AUDIO
IN (R)
IN (L)
3. To connect the TV to a TV Game
You can enjoy playing a TV game on the screen adjusted the good brightness for your eyes.
1. Connect a TV Game to the LINE 2 (Front) Front of TV/DVD
TVGAME J VIDEOIN-_v ......................
1 = T _r_ _AUDIO IN (R)
t t t
To Audio/Video OUT __=_
!_ AUDIO IN (L)
Audio/Video cord (not supplied)
I
2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.
Game timer function: After one hour the Game timer display will appear every 30
minutes for about 5 seconds showing how long the time has passed up to 4 hours.
Notes:
• You can also change the TV screen to LINE 2 by pressing INPUT SELECT. But this screen is normal.
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
45