Connection To Other Equipments - Toshiba MD20FM1 Owner's Manual

Connections to other equipments
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-
ent on the model and features of each component. Check the Owner's Manual provided with each component
for the location of video and audio inputs and outputs.
Using an Audio Amplifier
Rear of TV/DVD :
, , []ooo o
A UAd_d it )(ROUoPu_;u t// !_ To Audio (a) Audio (L) Input
AUDIO cord (not supplied)
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as
shown below.
Rear of TV/DVD
CoaxialDigital
AudioOutput
J
Coaxialdigitalcable(not supplied)
To Coaxial Digital
Audio Input_
V---1 0
oo_00o_1
AV Amplifier with built-in digital surround [ i
decoder as listed above
Front -_
Speaker
(Left)
Front
Speaker
TV/DVD Subwoofer (Right)
!
_ Center Speaker
Surround _ Surround
Speaker (Left) _ Speaker
(Right)
* Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTE:
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be
damaged.
• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
44