Zooming/Locating Desired Scene - Toshiba MD20FM1 Owner's Manual

Zooming / Locating desired scene
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
RECALL "rViDVD POWER
INPUT SELECT
QQO0
GAME
Q (D (D (D
(D (g_ (!) G)
CLOSED
SLEEP CAP'ON VOLUME
OQOQ
TOP MENU SUBTITLE AUDIO ANGLE
0000
SETUP/MENU DVDMENU CANCEL ZOOM/CHRTN
0000
(_RETURN (_SE_TER
1
Press ZOOM during play-
back.
The centre part of the
image will be zoomed in.
Each press of ZOOM will
change the ZOOM O_1
(x 1.3), O_2 (x 1.5) and
O_3 (x 2.0).
ql
Press • / • to view a different part of the frame.
You may move the frame from the centre position to LEFT
or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a
1:1 view (O_ Off).
Locating Desired Scene
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
during play-
Press JUMP
back.
Jump Time :
Title : - - -
Chapter : ---
Av lEnterlO-91CanceVJump
Press A or • to select the Time, Title or Chapter.
Note:
You can select the Pause, Slow or Search
playback in the zoom mode. However, you
cannot zoom in during the Slow or Search
playback.
3
Press Number buttons (0-9) to change the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
Press ENTER.
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
29