Table of Contents
Advertisement
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
Recording
Taking Photos
Before using a memory card for the first
time, be sure to initialize it with this
camcorder (
73).
1
Move the
/
images).
2
Turn the
switch to ON to set
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
62
(
21)
switch to
(Still
3
PHOTO
Press
halfway.
• Once the focus is automatically
adjusted,
will turn green and
one or more AF frames will appear.
• When you press
wireless controller, the still image is
recorded immediately.
4
PHOTO
Press
fully.
The CARD access indicator will flash
as the still image is being recorded.
IMPORTANT
Observe the following precautions while
the card access display (
on screen, and when the CARD access
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
switch or the operating mode.
NOTES
• If the subject is not suitable for
autofocus,
turns yellow. Adjust the
focus manually (
• When the subject is too bright,
"OVEREXP." starts flashing. In such
case, use the optional FS-43U II ND
filter.
on the
PHOTO
) appears
/
53).
Advertisement
Table of Contents
