Installing The Control Box; Installing The Oil Pan - Brother BAS-300G Basic Operation Manual

3-2. Installing the control box

Operator

3-3. Installing the oil pan

BAS-300G, BAS-311G, BAS-326G
Remove the eight screws (1), and then
remove the control box cover (2).
(3) Control box
(4) Bolts [4 pcs.]
(5) Plain washers [4 pcs.]
(6) Spring washers [4 pcs.]
(7) Nuts [8 pcs.]
1840B
(8) Power switch
(9) Wood screws [2 pcs.]
(10) Staples [4 pcs.]
1841B
For motor-driven
specifications, install the treadle unit
mounting bolt (A) before installing the
oil pan.
(Refer to "3-7. Installing the treadle unit
(motor-driven
specifications)".)
(1) Oil pan
(2) Nails [7 pcs.]
(3) Rubber cushions [4 pcs.]
(4) Waste oil tank
4911Q
3. INSTALLATION
work clamp
work clamp
5