Using This Guide; New Features Of Hp Sum 4.1.0; Minimum Requirements; Minimum Requirements For Windows Servers - HP Integrity rx2800 - i2 User Manual

Hp smart update manager user guide
Hide thumbs Also See for Integrity rx2800 - i2:
Table of Contents

Advertisement

Support for updating firmware on network-based targets such as the OA, iLO 2/iLO 3 through
Network Management Port, and VC Ethernet and Fibre Channel modules on HP ProLiant servers
NOTE:
behind these controllers.

Using this guide

HP SUM is delivered with many different deliverables. A deliverable is an HP product which contains HP
SUM and a set of firmware or software components. Some examples are the ProLiant Support for
Windows and the HP Smart Update Firmware DVD. It is important that you review the overview section
after this section for your deliverable to verify any specific limitations to HP SUM features that apply.
Then, you can review the sections describing the features of HP SUM. For more information, see the
Supported deliverables overview (on page 11) section.

New features of HP SUM 4.1.0

This release of HP SUM includes the following new support:
Updated support for Virtual Connect FW deployment for VC firmware 3.x and later
NOTE:
New CLI and input file parameters for Virtual Connect
CLI—oa_username and oa_password
o
Input file parameters—OAUID and OAPWD
o
Added support for online deployment of HP 3 Gb SAS BL Switch Firmware
Added Host Search options on the Select Installation Host(s) screen

Minimum requirements

Minimum requirements for Windows operating systems
servers" on page 7)
Minimum requirements for Linux
NOTE:
embedded/add-on devices in the target servers must be installed for HP SUM to discover the
devices.
NOTE:
website (http://www.hp.com/servers/psp).

Minimum requirements for Windows servers

To successfully deploy HP SUM on HP ProLiant and Integrity target systems based on a Windows®
operating system, the following must be available:
HP SUM does not support third-party controllers. This includes flashing hard drives
HP recommends using VCSU to deploy VC firmware v2.3x and earlier.
("Minimum requirements for Linux x86
For Linux and Windows operating systems, the respective device drivers for the
For a current list of supported operating systems on ProLiant servers, see the PSP
("Minimum requirements for Windows
servers" on page 8)
Introduction 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart update manager

Table of Contents