Mass Storage And Removable Media Devices - Compaq ProLiant 8000 Maintenance And Service Manual

Mass Storage and Removable Media Devices

Mass storage in Compaq ProLiant 8000 servers is divided between three hot-plug hard drive cages and
a removable media area. Mass storage and removable media devices include the following:
I
Up to seven 1-inch form factor Ultra2 hard drives (SCSI IDs 0 to 5, and 8) per drive cage
I
One slim-line combination CD-ROM/1.44-MB diskette drive
I
Two additional media bays
Figure 2-10 and Table 2-1 show the standard shipping configuration of the removable media
area and possible configurations for the hot-plug and Ultra2 SCSI drive cages in Compaq
ProLiant 8000 servers.
Figure 2-10. Mass storage and removable media areas
Location
Hot-plug drive cage #3
Hot-plug drive cage #2
Hot-plug drive cage #1
Removable media bay
Removable media bay
Removable media bay
CAUTION: Removable media blank bezels and hot-plug drive cage blanking panels must be
installed over unused mass storage and removable media device bays to maintain proper air
flow.
Cage #3
0 1 2 3 4 5 8
Cage #2
0 1 2 3 4 5 8
0 1 2 3 4 5 8
Cage #1
Mass Storage and Removable Media Area Configurations
Drive Positions
(SCSI Identification)
0-5 and 8
0-5 and 8
0-5 and 8
2
2
0-1
Removal and Replacement Procedures 2-15
2
1
0
Table 2-1
Configuration
Example of 1-inch hot-plug hard drives
Example of 1-inch hot-plug hard drives
Example of 1-inch hot-plug hard drives
Non-hot-plug, integrated, 1.44 MB, 3.5-inch diskette
drive
Non-hot-plug 24X Max IDE slimline CD-ROM drive
Non-hot-plug mass storage devices