500 - 599, Video Display Unit Test Error Codes - Compaq ProLiant 8000 Maintenance And Service Manual

3-38 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide
500 – 599, Video Display Unit Test Error Codes
The 500 series of diagnostic error codes identifies failures with video or system board functions.
Error Code
501-xx
502-xx
503-xx
504-xx
505-xx
506-xx
507-xx
508-xx
509-xx
510-xx
511-xx
512-xx
514-xx
516-xx
Video Display Unit Test Error Codes
Description
Graphics controller test failed.
Graphics memory test failed.
Graphics attribute test failed.
Graphics character set test failed.
Graphics 80 x 25-mode 9 x 14
character cell test failed.
Graphics 80 x 25-mode 8 x 8
character cell test failed.
Graphics 40 x 25-mode test failed.
Graphics 320 x 200-mode color
set 0 test failed.
Graphics 320 x 200-mode color
set 1 test failed.
Graphics 640 x 200-mode test
failed.
Graphics screen memory page test
failed.
Graphics gray scale test failed.
Graphics white screen test failed.
Graphics noise pattern test failed.
Table 3-7
Recommended Action
The following steps apply to error codes 501-xx through
516-xx.
1. Replace the monitor and retest.
2. Replace the graphics controller and retest,
-Or-
If the controller is on a separate card, replace the
graphics controller and retest.
3. Replace the system board and retest.