HP Integrity NonStop NB54000c Introduction Manual page 16

Hp power capping and hp dynamic power capping for proliant servers

Hide thumbs Also See for Integrity NonStop NB54000c:

Table of Contents

indicate that the Total System Input power requirement for this server configuration is 423 watts. This is the

predicted maximum amount of power that this server configuration would use under environmental and load

conditions. It is one of the numbers that an administrator could use when calculating the maximum power and

cooling requirements to support this system in the data center. For a rack containing a group of eight of these

servers, the total requirements would be 3384 watts.

Figure 10. HP Power Calculator results for a configured ProLiant DL380 G5 server

Table of Contents

Proliant dl280