Auto Tone Correction (Colorsync™) - Canon CanoScan FB 1200S User Manual

Auto Tone Correction (ColorSync™)
If you scan an image in 24-bit color with ColorSync
automatically. The ColorSync™ function automatically matches the tones produced and
displayed by scanners, displays and color printers. Optimal color correction is achieved
with ease without having to make adjustments with the histogram or other color
correction functions.
Caution
• This feature is available only when the scan mode is set to 24-bit color, not for
36-bit color, grayscale, or black and white.
• More time is required to start the program and scan when the ColorSync™
function is activated.
Hint
• ColorSync™ responds differently to each computer according to the unique
conditions affecting it (type of display used, etc.), which may cause differences
even between computers of the same make and system version. The tone
characteristics of an image scanned with ColorSync™ on one computer,
therefore, may change when processed on another computer.
• Color correction using the histogram function and gamma value settings
cannot be conducted when the ColorSync™ function is activated.
To Activate the ColorSync™ Function
Open the [Image] menu and select [ColorSync].
Color is adjusted automatically to the optimum settings. The automatic setting may
require a few seconds to activate. When ColorSync
in the menu. To switch ColorSync
to remove the check mark.
TM off, open the [Image] menu and select it again
53
53
S T E P
TM selected, you can adjust the color
TM
is on, you will see it checked
4