Selecting A Site; Unpacking The Server; Locating Materials - Compaq ProLiant 400 Setup And Installation Manual

2-2 Compaq ProLiant ML330 Setup and Installation Guide

Selecting a Site

Unpacking the Server

Locating Materials

Make sure that the installation area you select has the following features:
Sturdy, level installation site that includes dedicated and properly
grounded circuits, air conditioning, and static electricity protection
7.6-cm (3-in) clearance on all sides of server for proper ventilation
Separate electrical circuit for the server
CAUTION: Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS). This device
protects the hardware from damage caused by power surges and voltage spikes
and keeps the system in operation during a power failure.
Unpack the server, keyboard, and cables according to the instructions and
illustrations printed on the Quick Start Poster.
Locate the following materials that were shipped with your ProLiant ML330:
Keyboard
Mouse
Power cord
Documentation label inside the server (most of the option installation
and setup instructions are located on the label, which is attached to the
inside of the access panel). See Chapter 3, "Hardware Options
Installation" for instructions on removing the access panel.
Documentation and software packs inside the shipping box
In addition to these supplied items, you may need:
Torx T-15 screwdriver
Phillips screwdriver
Options or peripherals, such as expansion boards, monitors, uninterruptible
power supply (UPS), memory, or drives
Application software