Dish Network EZ User Manual page 10

7. Set the
receiver to
the satellite receiver, but this is OK.
: If your satellite receiver does not have a
Note
switch, see your satellite receiver's User's Guide
for how to set
channel 4.
8. Press and hold
on (it takes about five seconds).
9. Release
10.Enter
11.Press
12. light will flash three times.
SAT
If the light does not flash at all, repeat this
procedure starting with step 8.
13.Press
tunes to Channel 4, go to step 14. If not, go to
step 7.
14.Press the
receiver
to step 28.
15. Answer the questions in Table 1. The information
you provide is what you will use to teach your
remote control to change the channel on your TV
correctly.
118866
switch on the back of the satellite
. The TV will lose the picture from
CH4
TV Set Out
.
SAT
- .
0 4
while watching
MUTE
while watching your TV. If your TV
button. If you see the satellite
MENU
screen, check the box below and go
Menu
4
on the satellite receiver to
until both
light will flash.
SAT
SAT lights turn
TV
light.
9