Table of Contents
Advertisement
Display Dimensions
The recommended clearance shown in Figure 23 indicates the distance behind the
display module that should be left to provide free-flow of air for convection cooling. In
Figure 23, dimensions are in millimeters.
Figure 23. Display Dimensions.
Unless specified, tolerances are:
.x = 0.50
.xx = 0.25
Note: The dimensions in this drawing are approximate. Please contact Planar
Applications Engineering to request the actual drawing prior to beginning your
design.
LC640.480.21-065 Operations Manual (OM610-00)
33
Advertisement
Table of Contents
