Table of Contents
Advertisement
Power Sequencing (LCD)
When performing power sequencing:
Ensure the supply voltage for input signals is the same as for VCC.
Apply VCC within the LCD operation period. When the backlight turns on before
LCD operation or the LCD operation turns off before the backlight turns off, the
display may momentarily become white.
When the power is off, keep whole signals (Hsync, Vsync, CLK, DE, and DATA)
low level or high impedance.
Figure 3. Power Sequencing.
SUPPLY VOLTAGE SEQUENCE
4.75 V
VCC
0 V
t<150
Signal
0 V
*1
The supply voltage for input signals should be the same as VCC.
*2
Apply VDD within the LCD operation period. When the backlight turns on before LCD operation or the LCD
operation turns off before the backlight turns off, the display may momentarily become white.
*3
When the power is off, please keep whole signals (Hsync, Vsync, CLK, DE, and DATA) low level or high
impedance.
Video Signals
Video Signal Characteristics
Video signal inputs on J1 are digital inputs and are compatible with CMOS logic.
Table 7. Video Signal DC Characteristics.
Description
Absolute maximum input voltage
Low-level input voltage
High-level input voltage
0 <t<35 ms
ms
Power-on
Symbol
V
V
V
LC640.480.21-065 Operations Manual (OM610-00)
0 <t<35 ms
VALID
Power-off
Minimum
Maximum
-0.3
6.5
max
I
0
0.8
IL
2.2
5.25
IH
4.75 V
Units
Vdc
Vdc
Vdc
9
Advertisement
Table of Contents
