Muratec F-112P User Manual page 182

Display
[Incompatible]
[Jam 1] or
[No Cartridge]
[Line Busy]
[Line Error]
Load Document
Low Heat Error
Open Heat Error
[Over Heat]
[LSU Error]
Memory Full
[No Answer]
Meaning
The remote machine does
not have the requested
feature, such as a delayed
transmission.
It also occurs if the remote
machine does not have
enough memory space to
complete the operation you
are attempting.
The toner cartridge is not
installed.
The remote person did not
answer or the line is already
engaged.
Your machine cannot
connect with the remote
machine or has lost contact
because of a problem with
the phone line.
You have attempted to set
up a copy or fax operation
with no document loaded.
There is a problem in the
fuser unit.
A problem has occurred in
the LSU (Laser Scanning
Unit).
The memory is full.
The remote fax machine has
not answered after several
redial attempts.
Suggested solutions
Reconfirm the remote machine's
features.
Install the toner cartridge. See
page 1.10.
Try again after a few minutes.
Try again. If the problem
persists, wait an hour or so for
the line to clear and try again.
Or, turn the ECM on. See
page 6.35.
Load a document and try again.
Unplug the power cord and plug
it back in. If the problem
persists, please contact a service
representative.
Unplug the power cord and plug
it back in. If the problem
persists, please call for service.
Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
Try again. Make sure that the
remote machine is operational.
T
ROUBLESHOOTING
9
9.9