Dish Network 159263 User Manual page 16

Instructions
4
For AUX mode only. Press
0 for a second TV, or 1 for a
second DVD/VCR, or 2 for
a tuner, amplifier, or audio
receiver.
5
Enter one of the three-digit
equipment codes from the
table using buttons on the
number pad.
6
If you want to program
Limited Mode, press 1.
If not, skip to step 7.
7 Press POUND (#).
8 Press POWER to turn off
the equipment. If the
equipment does not turn
off, go to step 10.
9
Turn the equipment back
on and try some other
buttons to make sure they
work. If the code works for
other buttons, stop here.
10
If the code doesn't work,
repeat steps 3 through 9
with another equipment
code listed in the tables.
11
If you can't find a code that
works, try the instructions
that follow for Scanning
for Equipment Codes.
4
Additional Information
This step is for programming
the kind of equipment that
should be programmed in AUX
mode. If you're not
programming in AUX mode,
skip to step 5.
The three-digit equipment code
should be for the brand name of
your equipment that you found
in step 2.
See Limited Mode on page 3 for
more information.
If you entered the code
correctly, the mode button
flashes three times.
If the code you entered works,
the equipment should turn off.
For example, sometimes
POWER works when other
buttons don't. Note that more
than one code may work to turn
equipment on or off.
Try every code listed for your
brand until one works for your
equipment.