Dish Network 104333 User Manual page 9

TV M
To use the remote to operate a television, you must first set up the
remote to control the television. See Controlling a Device on page 15.
Then, you must press the TV mode button to set the remote to TV
mode. The TV mode button's back light turns ON to show that the
remote is set to TV mode. Make sure to keep the remote in TV mode
to use the buttons as described in this section.
If the TV has video input options, use this button to switch the TV
among those options.
P
Press this button to turn the television ON or OFF.
M
Press this button to turn off the sound. Press it again to restore
the sound.
Press the left-hand, minus (-) side of this button to lower the sound
volume. Press the right-hand, plus (+) side of this button to raise
the sound volume.
S
The Select button works as the Enter button for a TV.
104333
B
ODE UTTON
TV/V
IDEO
B
OWER UTTON
B
UTE UTTON
V
OLUME
B
ELECT UTTON
B
UTTON
B
UTTON
TV (Television) Mode
9