Switching Between Dual/Single Mode - Dish Network DuoDVR ViP 622 User Manual

Switching Between Dual and Single Mode
Put the satellite receiver in Single or Dual Mode by pressing the front panel MODE button.
Keep the following items in mind when switching the satellite receiver between Dual and
Single Mode:
Dual Mode front panel
Indications
indicator lights.
The Recording front panel
indicator lights to show
Recording
whether TV1, TV2, or both
are currently recording.
Favorites Lists set up for
both outputs (TV1 and TV2)
Favorites
are available.
Lists
Locks set up for both outputs
(TV1 and TV2) are available.
Locks
Note: If someone is using the TV2 outputs in Dual Mode, you will see a popup on the
nearby TV warning you that you are about to disrupt the use of the TV2 outputs.
Dual Mode
Single Mode front panel
indicator lights.
The TV1 Recording front
panel indicator lights when
you are recording from one
or both tuners.
Only Favorites Lists set up
for TV1 are available. The
lists for TV2 are not lost,
they are simply unavailable
in Single Mode.
Locks set up for only TV1
are available. The locks for
TV2 are not lost, they are
simply unavailable in Single
Mode.
Satellite Receiver
Dual and Single Modes
Single Mode
15