Tv And Vcr Connections - Dish Network 112182 User Manual

TV and VCR Connections

Use the following diagram and instructions to connect the satellite receiver
to a TV and VCR (optional).
TV Set Out to a TV
S O
ET UT
CHANNEL 3/4 switch on the receiver to the channel you use to
watch satellite TV.
TV Set Out to a VCR
between the TV S
Connect another cable between the VCR's output and the TV's
input. Be sure to set the CHANNEL 3/4 switches on the receiver
and VCR to the channel you use to watch satellite TV.
- Connect a coaxial cable between the TV
on the receiver an the TV's input. Be sure to set the
(Optional) - Connect a coaxial cable
O
on the receiver and the VCR's input.
ET UT
TV and VCR Connections
Page 29 Page 29