Tuner features
Tuning
Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches
between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Press the [
] or [
• During reception of stereo stations the "ST" indicator
is ON.
18
|
English
1 – 6
TI
ST indicator
Band display
Frequency display
] button.
NEXT
AM
FM
4
¢
Preset station number
Station Preset Memory
Putting the station in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency to put in the memory
Press the [
] or [
3
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until the function
item is not displayed above the [2] — [5] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
4
Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
SRC
] button.