Selecting The Source; Volume; Attenuator; System Q - Kenwood KDC-7027 Instruction Manual

Selecting the Source

Press the [SRC] button.
Source required
Tuner
CD
External disc (Optional accessory)
Auxiliary input
Standby (Illumination only mode)
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicles battery.
The time until full power OFF can be set in 'Power OFF
Timer' (page 36).

Volume

Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.

Attenuator

Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator
turns ON or OFF.
When it's ON, the "ATT" indicator blinks.

System Q

You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Sound setting
Flat
User memory
Display
Rock
Pops
"TUNER"
Easy
"CD"
Top 40
"CD CH"/"CD2"
Jazz
"AUX"
"STANDBY"
• User memory: The values set on the 'Audio Control'
• Each setting value is changed with the 'Speaker

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
(page 12).
Setting' (page 11).
First, select the speaker type with the Speaker setting.
Button
[2]
[3]
[4]
[5]
Display
"Flat"
"User"
"Rock"
"Pops"
"Easy"
"Top40"
"Jazz"
Display
"OFF"
"5/4"
"69/6"
"OEM"
11
|
English