Transmitter Chirp Muting; Transmitter Sensor Disable - Clifford CONCEPT 470 Manual

resetting the system, press

transmitter chirp muting

To temporarily turn off the arm or disarm chirps, use transmitter chirp
muting. Simply press
chirp(s) will be eliminated for that one operation only. The parking
lights will flash to confirm the arm/disarm command. If you want the
arm/disarm chirps turned off permanently, please refer to the User-
Selectable Features section of this guide.

transmitter sensor disable

To temporarily disable a sensor input, arm the system, press
twice then
trigger zones one, three, and eight are bypassed. Press the buttons
again; the lights flash four times and both warn away and full trigger
zones one, three, and eight are bypassed until the system is disarmed.
This can be performed anytime the system is armed.
1. Arm the system.
2. Press
3. The lights will flash four times; all warn away zones are
now bypassed.
4. Transmit the sensor bypass channel again.
5. The lights will flash four more times; the sensor warn away
and full trigger zones are now bypassed.
6. The sensor zones will reset when disarmed.
© 2 0 0 6 d i re c t e d e l e c t ro n i c s
again to disarm the system.
on the transmitter, and the confirmation
. The lights will flash four times and all warn away
twice then .
9