Using Your System; Arming - Clifford CONCEPT 470 Manual

twice then
These buttons activate remote valet.
twice then
These buttons disable the sensors.
twice then
These buttons enter safe start mode for manual transmission vehicles
and activate Autostart mode (If installed, additional parts required)

using your system

The buttons used in the instructions in this manual correspond to the
standard transmitter configuration. If your transmitter has been custom
configured, the icons on your transmitter buttons may not correspond
to the indicated functions.

arming

You can activate, or arm, the system by pressing
mitter for one second. When the system arms, you will hear two short
siren sounds, or chirps, and see the parking lights flash twice. The LED
will begin to flash steadily. If the vehicle's power door locks have been
connected to the system, the doors will lock.
While the system is armed, the LED status indicator will flash approxi-
6
Buttons
Buttons
Buttons
on your trans-