DirecTV ProScan DSS Receiver User Manual page 57

The Menu System
Home Control setup
Once the Data Interface module is connected to the LOW SPEED
DATA port, you must tell the receiver to use this port for Home
Control.
1. Press MENU•SELECT to bring up the Main menu.
2. Point to and select Options .
3. Point to and select System Options .
4. Point to and select Data Port and choose Home Control as the
default setting
Device Setup
1. From the Main menu select Home Control .
Home Control can control several devices.
2. Select a device you would like to control.
Keep track of devices by assigning a label.
3. Complete the on-screen sentence using the arrow buttons and
MENU•SELECT. Press MENU•SELECT to scroll through the lists of
appliances and locations.
4. Use the arrow buttons and MENU•SELECT to select the house and
module codes that match the device's remote module. Select Save
Setup to complete the setup.
55