Recording Shows To Videotape; Avi Or Quicktime Output; Printing A Show; Setting Up A Page - ScanSoft Kai’s Power SHOW User Manual

Recording Shows to Videotape

Recording shows to videotape is a
convenient output option for
distribution. However, an add-on
videographics card is required to convert
your RGB signal to a video format such as
NTSC or PAL. Please consult your
computer manual to determine your
video output capabilities.

AVI or QuickTime Output

Although SHOW supports the import of
AVI or QuickTime video clips, it does not
offer AVI or QuickTime output. Since
SHOW's Save feature "collects and
optimizes" your show content, this option
produces editable show files, which are
also relatively smaller than an AVI or
QuickTime movie of your show would be.
Therefore, sharing presentations using
SHOW's .sas format and SHOW Player
Software is an easier and more convenient
option for consumers.

Printing a Show

There are two ways of printing your slides:
• one slide per page
• multiple slides per page

Setting Up a Page

The Page Setup option in the OUT Room
displays a dialog that lets you control how
your SHOW Slides will appear on a
printed page. You can use the options in
this dialog to set up a contact sheet type
layout, or to print each slide on a separate
page.
The dialog also lets you print frame
numbers and file names with the slide
pictures. This can be a handy feature if
you're using the printed pages as a
storyboard.
To set up a page:
1. Move the cursor over the Page Setup
label, then click the Select Page Setup
Options for Print button.
The options dialog for your printer
appears.
2. Set the print options you want to use,
then click Print.
The Page Setup dialog appears.
3. Enable one of the layout options at
the bottom of the dialog.
You can print a single frame per page,
4 frames per page, or up to 9 frames
per page.
4. Enable the Slide Numbers option if
you want the slide numbers to appear
under the slide picture.
5. Enable the File Name option if you
want the file name for the content on
a slide to appear on the print.
6. Click Print to start printing.
Click Done to store your page settings
without printing.

Printing a Single Slide

When you print a single slide, only the
slide displayed in the Output Preview is
printed.
To print a single slide:
1. Select the slide you want to print
using the Output Preview.
The OUT Room 67