PRESONUS DIGIMAX User Manual page 8

O V E R V I E W
which of the three sampling rates is required for optimum
synchronization.
Dual Concentric Control. Each channel of the DigiMax has a
dual concentric rotary control for adjusting the channel's gain
(inner) and for selecting the dual domain limiter's threshold
(outer).
Analog Output.
The rear panel of the DigiMax contains
analog impedance balanced outputs for each channel. These
outputs provide an analog duplicate of the digital output of the
unit. This duplication of the digital output allows the user to
monitor the analog output with a mixing console and
overcoming the "latency" problem (time delay) that may be
encountered when trying to record in "digital".
Digital Optical Output. The DigiMax has a adat
lightpipe
output that can be used with any commercially available digital
optical cable. This cable can supply eight simultaneous
outputs.
Digital Output. The DigiMax has a chassis mounted 9 pin
connector which can provide either AES/EBU or SP/DIF
outputs depending on which model of cable is used as well as
the internal configuration of the jumpers on the output card of
the unit.
7