Setup Mode - Alesis DEQ230 Reference Manual

3
Basics of Equalization

Setup mode

This is where you will find some of the features that govern the
way the DEQ230 operates in the other modes. They are what you
would call "Global" settings, in that their status is not stored with a
program. No matter which program you call up, these settings will
not change. And since they make such a big difference in how the
unit works, they have been "tucked away" so they won't be altered
accidentally.
To access Setup mode, first you must turn off the DEQ230. Then
turn the unit back on, wait until you see the letters "DEQ230" in
the display, and then hold down the [STORE] button. After a
couple of seconds you will see the word "SETUP" appear in large
letters above Channel A's [BAND SELECT] buttons. Then the
LEDs over Channel A will read "M. LVL," and the LEDs over
Channel B will read "+00."
The first twelve [BAND SELECT] buttons of Channel A are
used to select between the different functions in Setup mode. They
are:
Item (button)
1 (25 Hz)
2 (31.5 Hz)
3 (40 Hz)
4 (50 Hz)
5 (63 Hz)
The following functions are available on the DEQ230D only.
6 (80 Hz)
7 (100 Hz)
8 (125 Hz)
9 (160 Hz)
10 (200 Hz)
11 (250 Hz)
12 (315 Hz)
Note that as you switch from one function to the next that the
Numeric LED Display will change to show the number of the
selected function.
44
Function
Master Level
Release Edit Group
Audition Auto
Edit Time Out
Lock
MIDI Channel
MIDI Program Chg
Sys-Ex Transmit
Sys-Ex Receive
MIDI Out/Thru Select
Sample Rate Select
Force Analog Input
Displayed Options
M. LVL +/- 6 dB
REL E.G. Off/On
AUD AUTO Off/On
EDIT T.O. Off/On
LOCK Off/On
MIDI CH All, 1-16
PRG CHG Off/On
SND SYX Send?
RCV SYX Waiting
MIDI O/T Out/Thru
INT CLOCK 44.1/48
INPUT SRC Auto/Analog
To return to Program mode
from Setup mode, press the
[LINK/EXIT] button or turn
the DEQ230 off and back on.
Default
Value
0 dB
On
On
Off
Off
ALL
On
N/A
N/A
Thru
48
Auto
The [STORE] button may be
used to cycle through the
functions also.