Remote Control Operation - Sanyo PDG DSU21 - SVGA DLP Projector Owner's Manual

Remote Control Operation

Point the remote control at the infrared remote sensor and press a button.
Operating the projector from the front
Operating the projector from the rear
The remote control may not operate when there is sunlight or other strong light such
as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is visible.
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high temperature or
humidity.
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
EN-16