Network Settings Are Not Restored After Cutting The Connection To The Computer With Easymp Network Projection - Epson BrightLink 475Wi Operation Manual
Operation guide - easymp network projection
Hide thumbs
Also See for BrightLink 475Wi:
- User manual (259 pages) ,
- Installation manual (140 pages) ,
- Operation manual (47 pages)
Table of Contents
Advertisement
Troubleshooting
Error Messages
Network adapter information could not be obtained.
One or more connected projectors do not support
resolutions greater than SXGA. Reduce the screen
resolution and reconnect.
One or more projectors are not responding.
Enter the keyword displayed on the projector screen.
Cannot start this application while USB Display is running. Close USB Display and then start EasyMP Network Projection.
Cannot connect to the projector using this version of
EasyMP Network Connection. Install the latest version of
EasyMP Network Projection.
Network settings are not restored after cutting the connection to the computer with EasyMP Network Projection.
Check
Are you manually connecting to a Wireless LAN when the
computer starts up?
Quick Connection Mode
Check the following point.
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see your projector User's Guide.
There is a projector with an incompatible resolution in the connection destination. Change the
computer screen resolution to SXGA (1280x1024) or less.
You cannot connect to multiple projectors simultaneously. Check the network settings on the
computer and the network settings on the projector.
For details on the network settings to be made on the projector, see your projector User's Guide.
Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
To connect, install the current version of EasyMP Network Projection from the EPSON Projector
Software for Meeting & Monitoring CD-ROM supplied with the projector.
Try connecting to the Wireless LAN manually.
Remedy
Remedy
50
Advertisement
Table of Contents
