Multi-Level Security Arming - Directed Electronics Python 990 Owner's Manual

➜

multi-level security arming

Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be
bypassed when the system is armed. (See Table of Zones section of
this guide.) Pressing
within five seconds of arming the system will activate the Multi-
Level Security feature. Each time
security level is selected. The different security levels are selected
as follows:
➤ Press
➤ Press
twice followed by a long chirp. Zone 2 is now bypassed.
➤
Press
three times followed by a long chirp. Zone 4 is now bypassed.
➤ Press
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
➤
Press
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
© 2006 directed electronics—all rights reser ved
(only in Standard Configuration) again
once: The siren chirps once. The system is armed.
a second time within five seconds: The siren chirps
a third time within five seconds: The siren chirps
a fourth time within five seconds: The siren chirps
a fifth time within five seconds: The siren chirps
is pressed again, a different
23