Multi-Level Security Arming - Directed Electronics 7900 Installation Manual

multi-level security arming

Multi-Level Security Arming is a feature that allows the user to select which of the system's inputs or sensors
will be active and which will be bypassed when the system is armed. (See Table of Zones section of this guide.)
Multi-Level Security Arming can only be accessed from a standard configuration transmitter. Pressing the arm
button of the standard configuration transmitter again within five seconds of arming the system will activate
the Multi-Level Security feature. Each time the arm button is pressed again, a different security level is selected.
The different levels of security are selected as follows:
■ Pressing
■ Pressing
Two is now bypassed.
■ Pressing
Four is now bypassed.
■ Pressing
Zones Two and Four are now bypassed.
■ Pressing
input zones, except the ignition, are now bypassed.
44
one time: The siren chirps once. The system is armed.
a second time within five seconds: The siren chirps twice followed by a long chirp. Zone
a third time within five seconds: The siren chirps three times followed by a long chirp. Zone
a fourth time within five seconds: The siren chirps four times followed by a long chirp.
a fifth time within five seconds: The siren chirps five times followed by a long chirp. All
DRAFT
© 2005 Directed Electronics—all rights reserved