Panic Mode; Remote-Controlled Silent Arm/Disarm; Valet Mode - Directed Electronics Avital 2300 Owner's Manual

Directed electronics avital 2300 owner's guide

Hide thumbs Also See for Avital 2300:

Table of Contents

have waited too long to press the Valet switch; turn the ignition

off and repeat the process.

Location of Valet Switch_________________________________

Panic Mode

If you are threatened in or near your vehicle, you can press

for 1.5 seconds to trigger Panic Mode on your security system and

attract attention. The siren will sound and the parking lights will

flash for 30 seconds. To stop Panic Mode at any time, press

, or

on the remote.

Use the remote-controlled silent arm/disarm to temporarily turn

off the arm or disarm chirps by briefly pressing

arming or disarming. The confirmation chirp(s) will then be elimi-

nated for that one operation only. To permanently turn off the arm

and disarm chirps, contact your installation dealer.

NOTE: The warn away response to lighter impacts is bypassed if the sys-

tem is armed using the silent arm/disarm. This ensures that the siren

does not chirp in an environment where you do not want chirps to be

emitted. The system is still capable of being triggered by heavier impacts;

only the warn away response generated by light impacts is bypassed.

Valet Mode prevents your security system from arming and

triggering either automatically or with the remote transmitter.

In Valet Mode, the system will not arm, but all convenience

functions (door locks, trunk release, etc.) remain operational.

2001 Directed Electronics, Inc.

before either

Table of Contents