Disabling The System Without A Transmitter; Silent Mode - Directed Electronics 440HP Owner's Manual

➜

disabling the system without a transmitter

If your remote transmitter is lost or damaged, you can manually
override the system. To do this, you must have the vehicle's igni-
tion key and know where the Valet
check with the installer for the location of the Valet
Location of Valet Button_________________________________
➜

silent mode

To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
8
To disarm the security system,
the ignition to the ON posi-
tion. Press and release the
Valet switch
seconds. The status LED will
stop flashing and the vehicle
should start. If the vehicle
does not start, you may have
waited too long; turn the ignition off and repeat the
process.
® switch is located. Be sure to
within 10
for less than one second before
© 2002 directed electronics, inc.
® switch.
DRW-35
turn