Starter Anti-Grind Circuitry; Disabling The Remote Start System - Directed Electronics 474A Owner's Manual

Starter Anti-Grind Circuitry

Whenever the vehicle is remote started, advanced anti-grind circuitry
prevents the starter from engaging, even if the key is turned to the start
position. This prevents damage to the starter motor if the key is turned to
the start position during remote start operation.
Note:
Anti-grind circuitry only works when the remote start system is op-
er at ing the motor and the optional Failsafe Starter Kill relay is installed.
®

Disabling the Remote Start system

This feature allows your system's remote start unit to be temporarily
disabled to prevent the vehicle from being remote started accidentally.
This feature is useful if the vehicle is being serviced or stored in an
enclosed area. To disable the remote start, move the shutdown toggle
switch to the OFF position. The switch can be installed in a location
of your choice. Check with your installer for recommended locations.
Location Of Shutdown Switch
_________________________
11
© 2010 Directed Electronics. All rights reserved.