Powering Off The Device; Contacting Juniper Networks - Juniper SRX210 Quick Start Manual

Task 9: Create the Dial Plan
Create the dial plan to enable the survivable call server and media gateway to determine
how calls are routed:
1. Select Configure > Convergence Services > Dial Plan, and click on Dial Plan.
The Dial Plan Configuration page appears.
1. Click Add to create a new dial plan. The New Dial Plan Configuration page appears.
2. Enter a name in the Dial Plan Name field, and click Add. The New Route Pattern
Configuration page appears.
3. Perform the following mandatory basic actions:
Step Task
Route Pattern Specify the route pattern name.
Call Type Select the call type. The default is trunk-call.
Trunk-groups Select the preconfigured trunk groups to include in the
route pattern.
You can accept the default values for the Preference and Digit Manipulation fields.
Task 10: Configure the Media Gateway
Configure the media gateway to enable routing of calls to and from trunks and analog
phones connected to the device when the peer call server is accessible:
1. Select Configure > Convergence Services > Media Gateway > Gateway. The
Media Gateway Configuration page appears.
2. Click Add, and enter the following mandatory settings:
Step Task
Media Gateway Specify the device name.
Call Server Select a peer call server with which to associate.
Dial Plan Select a preconfigured dial plan.
Zone Specify the service point for the device's zone to
enable the media gateway and survivable call server
services for the specified zone.
You can accept the default values in the Port (5060) and Transport (UDP) fields.
Task 11: Configure the Survivable Call Server
This server assumes the responsibilities of the peer call server when the peer call server
is unreachable:
1. Select Configure > Convergence Services > Call Service. The Survivable Call
Service page appears.
2. Click Add to create a new call service, and perform the following mandatory basic
actions:
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are
trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies
in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Products made or sold by Juniper Networks or components thereof might be covered by one or more
of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899,
6,552,918, 6,567,902, 6,578,186, and 6,590,785. Copyright © 2010, Juniper Networks, Inc. All rights reserved. Printed in USA. Part Number:530-036934 Rev. 01, October 2010.
Step Task
Call Service Name Specify the name for the call service.
Call Server Select the peer call server name.
Dial Plan Select the preconfigured dial plan to be used for the
survivable call server.
Zone Specify the name for the zone.
All other parameters for configuring the call service are optional and you can accept the
default values set for these parameters.

Powering Off the Device

You can power off the device in one of the following ways:
Graceful shutdown—Press and immediately release the Power button. The device
begins gracefully shutting down the operating system.
Forced shutdown—Press the Power button, and hold it for 10 seconds. The device
immediately shuts down. Press the Power button again to power on the device.
You can reboot or halt the system in the J-Web interface by selecting Maintain >
Reboot.
For additional configuration information, see the Branch SRX Series Services Gateways
Golden Configurations at
http://www.juniper.net/us/en/local/pdf/app-notes/3500153-en.pdf.
For detailed software configuration information, see the software documentation
available at http://www.juniper.net/techpubs/software/junos-srx/index.html.

Contacting Juniper Networks

For technical support, see www.juniper.net/support/requesting-support.html.