Juniper SRX210 Quick Start Manual page 3

Method 1: Obtaining a Dynamic IP Address on Your Services Gateway
Use the port labeled 0/0 (interface ge-0/0/0) to connect to your Internet Service
Provider (ISP). Your ISP will assign an IP address using the DHCP process. If you
use this method, when you get to Task 7, skip steps 1 through 4.
Method 2: Obtaining a Static IP Address on Your Services Gateway
Use the port labeled 0/0 (interface ge-0/0/0) to connect to your ISP. Your ISP will
have provided a static IP address. You will not receive an IP address using the
DHCP process. If you use this method, you must configure the static IP address on
the services gateway as described in Task 7, steps 1 through 4.
Task 6: Access the J-Web Interface
1. Launch a Web browser from the management device.
2. Enter http://192.168.1.1 in the URL address field.
3. Specify the default username as root. Do not enter any value in the Password field.
4. Click Log In. The J-Web Setup Wizard page appears.
Task 7: Configure the Basic Settings
Configure the basic settings, such hostname, domain name, and root password for your
services gateway.
IMPORTANT: Ensure that you have configured the IP address, root authentication,
and default gateway before you apply the configuration.
NOTE: All fields marked with an asterisk (*) are mandatory.
NOTE: All network and management access settings are optional.
If you used Method 2 in Task 5 to obtain an IP address on your services gateway, ensure
that you make the following J-Web modifications:
1. On the Configure System: Network Settings page of the wizard, enter the IP address
of the gateway in the Default Gateway field, and enter server names in the DNS
Name Servers list. Your ISP provides the IP address for the gateway and the server
names.
2. On the Configure Interfaces page of the wizard, select the ge-0/0/0.0 interface and
click Edit.
3. On the Add/Edit interface page, next to Address, clear DHCP and select IP
Address.
4. In the IP Address/subnet field, enter the manual IP address provided by your ISP.
The IP address must be entered in a.b.c.d/xx format, where xx is the subnet prefix.
NOTE: Make sure that you have selected the required services and protocols under
Services (Inbound) and Protocols (Inbound). Select all to permit all protocols and
services.
NOTE: You can use the Configure J-Web Preferences page of the wizard to set the
J-Web starting page options and J-Web commit options.
Task 8: Apply the Basic Configuration
On the last page (Review and Commit) of the wizard, review the basic configuration and
click Commit to apply the configuration.
After you configure the basic settings, the J-Web Setup wizard redirects you to the
J-Web pages where you can continue working in the J-Web interface.
After you complete initial setup configuration, the Setup wizard is no longer available. To
make changes to the configuration, use the J-Web interface.
NOTE: To make any changes to the interface configuration, see the Branch SRX Series
Services Gateways Golden Configurations at
http://www.juniper.net/us/en/local/pdf/app-notes/3500153-en.pdf.
Page 3