Panic Mode; Silent Mode; Transmitter Standard Configuration; Standard Transmitter Configuration - Directed Electronics Viper 220MAX Owner's Manual

Directed electronics vehicle security system owner's guide

Table of Contents

Panic Mode

If you are threatened near your recreationnal vehicle, you can attract atten-

tion by triggering the system with the remote transmitter. Just press

2.5 seconds, and you will enter Panic Mode. The siren will sound and the

brake light will flash (If installed) for the programmed siren duration. to stop

Panic Mode at any time, press

To temporarily turn off the arm or disarm chirps, use the Slent Mode. Simply

press

confirmation chirp(s) will be eliminated for the one operation only. If you

want the arm/disarm chirps turned off permanently, your dealer can do this

for you.

NOTE: The warn Away response to lighter impact is bypassed if the system is armed using Slient Mode. This

ensures that no chirps will beemitted by the siren in an area you want chirp-free. The system is still capable

of triggering, only the Warn Away response is bypassed.

The security system is suplplied with 2- 4 button remote transmitter, when

using the auto configuration of the Transmitter Learn Routine, here's the stand-

ard configuration you will get of the 820041 remote transmitter, will be :

2002 Directed Electronics, (Canada). Inc.

for less than one second before arming or disarming, and

Arms the security system

Disarm the security system

Panic Mode activation, press for 1.5 seconds

Silent Mode activation, press for 1.5 seconds

before pressing on the lock/unlock button

AND

on the remote transmitter again.

Channel 3 for auxiliary function 508 D

activation

for

Table of Contents