Table of Contents
Advertisement
protective cap
Black
Yellow
Magenta
BCI-6BK
BCI-6Y
BCI-6M
Black
BCI-3eBK
6
3
Hold the ink tank as shown in the
diagram and remove the orange
protective cap.
• Do not squeeze the side of
ink tanks as this may cause
the ink to leak out and stain
your clothes and hands.
• Do not touch the open ink
port.
• Do not reattach the protective
cap once you have removed
it.
4
Insert the cyan ink tank into the right-
hand slot. Press the
tank until it clicks into place.
5
Use the same procedure to install the
other ink tanks into their appropriate
slots.
Check the labels to make sure that each tank is in the
correct position.
• Only install the ink tanks in the positions specified
by the labels.
• If ink tanks are not installed in the right position,
colors will not be printed correctly. Immediately
Cyan
reinstall the tank in the correct position and carry
BCI-6C
out Print Head Cleaning. For details, refer to the
User's Guide.
6
Put back the Inner Cover and close the
Top Cover.
ink port
mark on the ink
Advertisement
Table of Contents
