Lifescan ONETOUCH ULTRA2 Owner's Booklet page 4

Getting a blood sample
Prepare the lancing device
Remove the blue cap and put
a new lancet in the lancing
device. Twist off the protective
disk. Replace the cap and cock
the lancing device.
iii
Get a drop of blood
Hold the lancing device firmly
against your finger. Press the
release button.
Gently squeeze and/or
massage your fingertip until
a round drop of blood
( sample size) forms
on your fingertip.
pg. 14 Applying blood
and reading results
Touch and hold the drop of
blood to the narrow channel in
the top edge of the test strip
Blood will be drawn into the test
strip. Keep holding the drop of
blood to the top edge of the test
strip until the confirmation
window is full. The meter will
begin to count down from 5 to 1.
Then, your blood glucose level
appears on the display along
with the unit of measure, and
the date and time of the test.
If the test results are lower than,
higher than, or not what you
expect, see pages 30–32.
pg. 26