Lifescan ONETOUCH ULTRA2 Owner's Booklet page 32

Applying blood and reading results
Once you have a blood sample and your meter shows the
screen, you are ready to obtain a blood glucose result. If your meter
does not show the
and re-start the test process. See page 10.
1. Prepare to apply the sample
Keeping your finger extended and steady, move the meter and test
strip toward the blood drop.
Do Not hold the meter and test strip underneath the
blood drop. This may cause blood to run into the test
port and damage the meter.
26
APPLY BLOOD
Do Not apply blood on the top
of the test strip.
Fingertip
screen, remove the unused test strip
APPLY BLOOD