Lifescan ONETOUCH PROFILE Owner's Booklet page 37

(PST). If you are not in Pacific standard
time, you will need to change the time
setting in your meter in order to have
the correct time and date appear with
your test result. If you are in mountain
standard time (MST), add one (1) hour;
central standard time (CST), add two (2)
hours; eastern standard time (EST), add
three (3) hours. If you do not reset the
time, the meter will accurately record
each test result using PST. You will also
need to reset the time whenever there is
a change to or from daylight saving time.
Note: The accuracy of your test
results will not be affected if you
do not set the clock to the correct
time.
Setting the Time
Enter the set-up mode (see page 27). Use
the M button to choose the Time option.
The current time will show. Press the C
button to change the time; the hour and
am or pm will flash. Press the C button
again to advance the hour to the correct
setting. Press the M button and the
minutes will flash. Use the C button
to change the minutes. Press the M
button to see the new time setting (the
colon will flash). You may now turn
off the meter to exit the set-up mode or
press the M button again to move to the
next option.
30