Tools; Admin - D-Link DIR-835 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as the User, you
cannot change the settings (you can only view them).
Enter a name for the DIR-835 router.
Gateway Name:
Enter a name for the router.
Enable Graphical
Enables a challenge-response test to require users to type letters or
Authentication:
numbers from a distorted image displayed on the screen to prevent online
hackers and unauthorized users from gaining access to your router's
network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely.
Server:
Enable Remote
Remote management allows the DIR-835 to be configured from the
Management:
Internet by a web browser. A username and password is still required to
access the Web-Management interface. In general, only a member of your
network can browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator tasks from the
remote (Internet) host. The port number used to access the DIR-835.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of
the DIR-835 and 8080 is the port used for the Web Management interface.
Remote Admin
If you have enabled HTTPS.Server and checked Use.HTTPS, you must
Inbound Filter:
enter https:// as part of the URL to access the router remotely.
Details:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to
remove the rule.
D-Link DIR-835 User Manual

Tools

Admin

74