N/A (5Ghz) - D-Link DIR-835 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Schedule:
Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down
menu. Click Add.New to create a new schedule.
Wireless
Service Set Identifier (SSID) is the name of your wireless
Network Name:
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
802.11 Mode:
Select one of the following:
802.11a.Only - Select if all of your wireless clients are
802.11a.
Mixed.802.11n.and.802.11a - Select if you are using
both 802.11n and 802.11a wireless clients.
802.11n.Only - Select only if all of your wireless clients are 802.11n.
Enable Auto The Auto.Channel.Scan setting can be selected to allow the DIR-835 to choose the channel with the least amount of interference.
Channel Scan:
Wireless
Indicates the channel setting for the DIR-835. By default the channel is set to 6. The Channel can be changed to fit the channel
Channel: setting for an existing wireless network or to customize the wireless network. If you enable Auto.Channel.Scan, this option will
be greyed out.
Transmission Select the transmit rate. It is strongly suggested to select Best.(Auto) for best performance.
Rate:
D-Link DIR-835 User Manual

802.11n/a (5GHz)

29